The Adventure Power All-in-One keeps you prepared for any emergency and includes a jump starter, air compressor, and a 200-watt inverter. The 250 PSI air compressor is capable of inflating an automobile tire in 10 minutes. Heavy duty 400 ampere-hour insulated metal battery clamps are durable and easy to use. The 200-watt DC/AC internal power inverter can power small appliances from cell phones and radios to electrical tools and laptop PCs.
250 PSI Air Compressor
The powerful 250 PSI internal air compressor is capable of inflating an automobile tire in just 10 minutes. The compressor unit is thermally protected from overheating, and the strong, fabric-covered output hose with clamp-on valve stem coupler is rugged enough to last through many emergencies. In addition to a built-in pressure gauge and ON/OFF switch on the outside of the unit, the compressor includes multiple nozzle attachments for inflatables, tires, and more.
12V Jump Starter
The Adventure Power All-in-One includes a 12V, 18 Ah sealed lead-acid battery capable of delivering 400 cranking amps. The large, easy-to-use ON/OFF rotary switch helps prevent sparking, and the 4 gauge cables have a lengthy 29” reach. A battery status indicator signifies the charge-state of the internal battery. Heavy duty, 400A insulated metal battery clamps ensure a strong point of connection. Built-in alarms for short clamps and reverse polarity increase safety. The ergonomic handle of the All-in-One doubles as a protective housing for docked clamps.
The All-in-One has a 18-ampere hour battery. At full power, you will have enough power to deliver 30 starting attempts with a 3-minute interval after each attempt. In order to achieve full potential, All-in-One must be kept in an environment with temperatures around 70 degrees (F).
Two 12V DC Power Sockets and One AC Power Socket
Included on the face of the All-in-One are two 12V DC power sockets for powering 12V accessories, protected with a 30A manual-reset circuit breaker. The 12V 1-Amp internal battery charger features two-stage charging which allows for the charger to be connected to wall outlet indefinitely--so the internal battery can be maintained at a full charge at all times.
The 200-watt, DC/AC internal power inverter also includes an AC socket for conventional wall plugs. The inverter in the All-in-One will provide 120 VAC power to operate AC appliances that run on standard 120 VAC and consume no more than 200 watts. The AC outlet is located on the front of the unit with an ON/OFF switch.
Before attempting to operate an AC appliance with the inverter, you should first determine how much power is required to run the appliance. Refer to the appliances label or instruction manual which will normally have a power rating in watts. Do not attempt to operate appliances with input power ratings great than 200 watts.
Power Protection Features
- Overload – if the output exceeds 200 watts, either the inverter will automatically shutdown or the resettable circuit breaker located on the back of the unit will open. If this occurs, you must turn the inverter power switch OFF and push the circuit breaker to reset.
- Short Circuit – The unit will automatically shutdown if the output is inadvertently shorted. It will restart when the short circuit is removed.
|Product||Pressure (PSI)||Estimated Time|
|Vehicle or Trailer Tires||26-30||8-10 minutes|
|Bicycle Tire (27" x 1 size)||80-90||40-50 seconds|
|Soccer Ball||6-8||10-15 seconds|
Power Running Time
|Appliance Type||Estimated Wattage Consumption||Estimated Time|
|Radios, Depth Finders, Fans||9 watts||24 hours|
|Cell Phone, Camcorder||10-12 watts||18 hours|
|Electrical Tools, Bilge Pumps||24 watts||9 hours|
|8"-12" TV||50-60 watts||2 hours|
|Lamps||60 watts||2 hours|
|Computer Printer||150-200 watts||30 minutes|